KP Technologies Roll-Up DIY .... Here you will find instructional, do-it-yourself guides and general knowledge about the platform.

[coolblue]

I am not reasonable for anything that happens during your install. I am showing you how I did mines and it works great

This is for Coupe. I dunno If same wiring on Sedan.

Where to Buy: KP Technologies

IG: kulblue
The Video Click Here

I got my KP Technogies Module since 2011.



Tools you will need



You need to remove all the covers, Screw and 2 Harness on the door panel.. Then pop the door panel..

First the tweeter cover







You need the small flat screw driver to pop the cover





Remove the all screws





Pop the cover under the power switch. Then remove the 1 screw and 2 harness..







After remove everthing just pop the door panel.. This is how they look..



The wiring need to hook up

RED +12 --------- White Wire
Black - Neg.------Black Wire
Blue-----------------Orange Wire
Green--------------Light Orange/Tanish Wire
Yellow--------------Light Green/Turquoise Wire (Option)

The Photos







Your DONE!!!!

[jman64cola]

Very nice I'll have to look into this for mine. As always I love your diys

Sent from my SM-G900V using Tapatalk

[coolblue]

Thnaks Bro.