Whats up guys!! I threw up a video a while back regarding the J-Power / SPC / Megan Racing camber kit install for our accords. Well Chris messaged me through FB and wanted to know all of the part numbers that I used for me to buy all new OEM Honda pieces like the nuts and bolts for the DIY. Depending on how corroded your car is, you might be able to just remove the bolts from the OEM camber arms and re-use them for the aftermarket ones, but for myself, along with a whole bunch of people, we weren't able to just take them off nicely. For me, I used an angle grinder to get the arms out.
I've included a link for the DIY. Just click on the thing below and it should direct you to my youtube page.
https://www.youtube.com/watch?v=5q3bwaDVJMg
As for the parts needed, I made a little table showing the part number, along with how many you will need.
Hope this helps