1 x 52300-TK5-A02 - Acura SPRING, RR. STABILIZER
2 x 52306-TK5-A01 - Acura BUSH, RR. STABILIZER HOLDER
Bushing brackets are exactly the same. Make sure to lube the bushings when putting this new sway bar in. I have an SE model so it made a huge difference going from a 13mm bar to a 20mm bar. When I did it was around $90 shipped for everything listed above but I believe it's since gone up. Great bang for buck upgrade though!
09+ TL SH-AWD Rear Sway Bar (20mm)
Bags, coilover, and springs. Need rotors or pads? Want to do a BBK conversion?
mcbtay wrote:1 x 52300-TK5-A02 - Acura SPRING, RR. STABILIZER
2 x 52306-TK5-A01 - Acura BUSH, RR. STABILIZER HOLDER
Bushing brackets are exactly the same. Make sure to lube the bushings when putting this new sway bar in. I have an SE model so it made a huge difference going from a 13mm bar to a 20mm bar. When I did it was around $90 shipped for everything listed above but I believe it's since gone up. Great bang for buck upgrade though!
If it is a 20mm bar, then it is the 09+ TL SH-AWD rsb. The 09+ TSX rsb is 17mm and the 09+ TL non SH-AWD is 19mm. There is also a 24mm and 25.4mm from the TLX but they will not fit due to our very miniscule clearance to our subframe with the 20mm rsb. Aftermarket rsbs that are larger than 20mm actually have a bump out to compensate for this similar to how our factory rsb was designed.
staro0989 wrote:If it is a 20mm bar, then it is the 09+ TL SH-AWD rsb. The 09+ TSX rsb is 17mm and the 09+ TL non SH-AWD is 19mm. There is also a 24mm and 25.4mm from the TLX but they will not fit due to our very miniscule clearance to our subframe with the 20mm rsb. Aftermarket rsbs that are larger than 20mm actually have a bump out to compensate for this similar to how our factory rsb was designed.
Thanks for the correction! I knew something seemed fishy when I was typing this up last night. It's been a while since I did this mod haha.
Who is online
Users browsing this forum: No registered users and 51 guests
It is currently April 28th, 2024
