Just seeing if there are any cool tool you guys use.
So far one of my favorite is the Irwin bolt Extractor set. It lets you remove rounded off bolt heads. Saved me a couple times.
I found with these its best not to use impact gun it will cause the extractor's teeth to strip. Also when you place it on the bolt head use a hammer and tap it into place until
it firmly grabs and you aren't able to spin it by hand.
Irwin 394001 (Starter Set) http://www.amazon.com/Irwin-Industrial- ... +bolt+grip
Irwin 394002 (Expansion Set) http://www.amazon.com/Irwin-Industrial- ... +bolt+grip
Here is a picture of 2 bolts I removed off my buddy's Evo X exhaust. The bolt were rusted in place and the head got rounded off. I made it worse trying to use vise grips.