Thanks, ill give it a try.

the stock lenses are already clear and if you adjust them right you can get alot of color out of them. if you search on hid planet there are lots of threads on adjusting the cutoff color.

is there any way to remove the gauge rings without taking the needles off? id like to paint mine but im nervous about breaking the gauges or installing the needles wrong.

yes, you can use any bix or low beam projector but they will probably require more modification to the reflector and will be harder to aim if your not experienced at it. check out hidplanet.com there is alot of good information there that will help you make your decision easier.

you can still use bix projectors, you just dont need to hook up the high beam function. if this is your first retrofit i would suggest mini H1's since they're easier to retrofit and if you decide you want to use the high beams you still have that option.

Thanks! , most of the parts are from the TL like the front wire harness cover and the windshield washer fluid cap. part#'s 32132-RK1-A00 - HOLDER F, ENGINE HARNESS 32741-RK1-A00 - STAY A, ENGINE WIRE HARNESS 76802-TK4-A01 - CAP ASSY., MOUTH The coolant tank cap and radiator cap cover is from an RL, ...

i found these greaseable polyurethane bushings from energy suspension on E-bay. since ive heard that bushings start to squeak after awhile and i dont want to take them apart every time to grease them i picked up a set. they have them in just about any size you need and they were only $20.

A. What is for sale/trade (model, specs, etc.):OEM 8th gen Strut bar sold
B. Condition:Used in like new condition
C. Price/What you want to trade for:$70 shipped(us only)
D. Location of item: N.Y. capitol region

The hoses do get stretched pretty tight so i replaced 2 of them with silicone hoses , i circled them below. the one in the back is the bottom hose on the purge solenoid, also the throttle body wires get pulled tight but nothing to worry about. With the shorter P2R manifold riser they wont be as tigh...