Search found 6 matches

by ricerocket
May 10th, 2015
Forum: Suspension & Brakes
Topic: 350z brembo rotor with stock calipers? :?:
Replies: 5
Views: 17856

Re: 350z brembo rotor with stock calipers? :?:

Wouldn't work unless you spaced the stock calipers out to make up for the increased diameter of the rotor. If you really wanted better performance out of your brakes why not just invest in good pads and fluids. You'd probably notice MUCH more of a difference from those two things than you would if y...
by ricerocket
January 29th, 2015
Forum: Exterior
Topic: xm antenna swap?
Replies: 3
Views: 9017

Re: xm antenna swap?

It will work. Can't guarantee that it will be a direct plug-n-play, but all an antenna really is, is one really long single piece of wire. Even if the connector on your car is different from the new XM antenna, if you know how to solder it's a pretty easy custom job.
by ricerocket
January 29th, 2015
Forum: Suspension & Brakes
Topic: Control arms...
Replies: 7
Views: 14055

Re: Control arms...

Wow super janky.... Definitely get an aftermarket 3-arm camber kit. With that amount of damage there is no telling if the original mounting points for the control arms have been bent or shifted out of their original place so replacing them with fresh OEM control arms might not allow you to fix your ...
by ricerocket
January 29th, 2015
Forum: Electronics & Lighting
Topic: Automatic windows
Replies: 11
Views: 22943

Re: Automatic windows

Could be one of many things. Your key fob battery could be low. I had this problem and the window roll down wouldn't work unless I was standing literally within inches of the car. Even with a fresh battery the range on the key fob isn't that great. Sounds stupid, but putting the metal part of your k...
by ricerocket
January 21st, 2015
Forum: Suspension & Brakes
Topic: OEM Brakes upgrade
Replies: 18
Views: 32544

Re: OEM Brakes upgrade

mr_cv3 wrote:Anyone suggest a low brake dust setup


Akebono pro act pads
by ricerocket
January 15th, 2015
Forum: Suspension & Brakes
Topic: 20mm rsb
Replies: 11
Views: 25107

Re: 20mm rsb

Yea the 19mm and 20mm sway bar from the TL works on the Accord. It doesn't have the right bends in it like the Accord sway has so it sits really really close the the rear crossmember. My 19mm has literally like 1 or 2mm of clearance.
It is currently April 27th, 2024