Installing the J-Power Camber Kit
Bags, coilover, and springs. Need rotors or pads? Want to do a BBK conversion?

milmast
Posts: 123
Joined: November 7th, 2014
Location: Ontario, Canada

Installing the J-Power Camber Kit

by milmast » January 8th, 2016

Whats up guys!! I threw up a video a while back regarding the J-Power / SPC / Megan Racing camber kit install for our accords. Well Chris messaged me through FB and wanted to know all of the part numbers that I used for me to buy all new OEM Honda pieces like the nuts and bolts for the DIY. Depending on how corroded your car is, you might be able to just remove the bolts from the OEM camber arms and re-use them for the aftermarket ones, but for myself, along with a whole bunch of people, we weren't able to just take them off nicely. For me, I used an angle grinder to get the arms out.

I've included a link for the DIY. Just click on the thing below and it should direct you to my youtube page.
https://www.youtube.com/watch?v=5q3bwaDVJMg

As for the parts needed, I made a little table showing the part number, along with how many you will need.
Part Numbers.pdf
(28.47 KiB) Downloaded 926 times

Hope this helps :)
Static Black Accord Coupe
Image milmast YouTube => http://goo.gl/1BsLa9
Image milmast Instagram => http://goo.gl/8MWPBK

jman64cola
Posts: 204
Joined: November 8th, 2014
Location: Davenport, Ia

Re: Installing the J-Power Camber Kit

by jman64cola » January 9th, 2016

This is very helpful info thank you for posting it here.
08 accord coupe EX-L NAV Manuel 5 speed
mods: Enkei gp5 18x8 : 3p air lift : Greddy cat back exhaust : j-power rear camber kit : sti lip : mugen rep grill : trunk and roof lip spoiler: H & R 25 mm spacers in rear: ebay intake : k tuner end user tune : skunk 2 down pipe : custom ebonized oak wood floor trunk : :lol: :lol: :lol:

milmast
Posts: 123
Joined: November 7th, 2014
Location: Ontario, Canada

Re: Installing the J-Power Camber Kit

by milmast » January 10th, 2016

Hope this helps anyone that is looking into doing this mod!!
Static Black Accord Coupe
Image milmast YouTube => http://goo.gl/1BsLa9
Image milmast Instagram => http://goo.gl/8MWPBK

User avatar
coolblue
Posts: 211
Joined: November 7th, 2014
Location: Washington State

Re: Installing the J-Power Camber Kit

by coolblue » January 11th, 2016

Nice man. All your DIY video are great bro... Thanks for sharing...
Image
Honda Accord Coupe EX-L I4
Belize Blue Pearl
Instagram • kulblue
Build Thread • CoolBlue™
FaceBook • CoolBlue™

Who is online

Users browsing this forum: No registered users and 7 guests

It is currently March 28th, 2024