Page 1 of 1
Rolling fenders
Posted: November 24th, 2014
by akidnamedmark
I am looking to run a set of 19x8.5 +17 19x9.5 +20 with 215/35 on the front and 235/35 on the rear and wanted to see what kind of work would be needed to get these to fit properly. I am currently on coilovers. And this is what the fronts look like.
Re: Rolling fenders
Posted: November 25th, 2014
by buchter24
coupe or sedan?
Re: Rolling fenders
Posted: November 25th, 2014
by akidnamedmark
COUPE
Re: Rolling fenders
Posted: November 25th, 2014
by coolblue
You need to roll your fender and lil pull. Plus - neg. Camber..
Re: Rolling fenders
Posted: November 25th, 2014
by leenacoupe
front is fine, maybe slight roll. Might not be necessary since you're doing 215... rear needs roll and some camber.
Re: Rolling fenders
Posted: November 25th, 2014
by akidnamedmark
Thanks again!
Re: Rolling fenders
Posted: February 26th, 2015
by TomsSedan
leenacoupe wrote:front is fine, maybe slight roll. Might not be necessary since you're doing 215... rear needs roll and some camber.
Any chance you might now of a fender roller in socal?
Re: Rolling fenders
Posted: March 2nd, 2015
by leenacoupe
Hmm... I gotta see. They guy I went to did a shitty job so I wouldnt recommend him at all. I heard of Fendarolla guy