Search found 66 matches

by Bigwilly
October 2nd, 2016
Forum: Suspension & Brakes
Topic: Acura type s bbk conversion
Replies: 5
Views: 17426

Re: Acura type s bbk conversion

hey man looks good. what exactly did you need to do to make these fit?
by Bigwilly
June 28th, 2016
Forum: Performance
Topic: Exhaust?
Replies: 3
Views: 12911

Re: Exhaust?

the ATLP is definitely an exhaust you want to check out. it has a great sound without pissing off the neighbours. I've had mine for almost 3 years and still love it. in my opinion its hands down the best sounding exhaust for the V6s. here are a few sound clips. https://www.youtube.com/watch?v=z5zWqh...
by Bigwilly
March 27th, 2016
Forum: Suspension & Brakes
Topic: BBK Compilation
Replies: 12
Views: 34772

Re: BBK Compilation

kevtheo1191 wrote:
Bigwilly wrote:
Big LrG wrote: @jonathane say's they will fit but need a 3-5mm spacer in the post above.

thanks for this!


For the stock wheels 18x8 +55 you will need at minimum a 15mm spacer. I have a 20mm and it clears no problem, but that is what I already had.

thanks Kev, so its for sure bigger than 3-5mm. thats a bummer
by Bigwilly
March 27th, 2016
Forum: Build Threads
Topic: COUPE: Bigwilly's Build Thread
Replies: 14
Views: 35154

Re: COUPE: Bigwilly's Build Thread

Car looks awesome! I was debating on how the dual tip exhaust would look but I think I might have to do it now. Also love the enkeis. I'm kinda tired of the massive lips trend. thanks man, and I'm always a big advocate for the ATLP quad exhaust. not only does it look good it sounds even better. and...
by Bigwilly
March 24th, 2016
Forum: Suspension & Brakes
Topic: BBK Compilation
Replies: 12
Views: 34772

Re: BBK Compilation

anyone have a firm answer as to whether or not the RL BBK will clear the OEM 18s? I am looking at getting a RL kit and have 20" summer rims that will clear no problem but i usually through my 18s on for the winter and I'm wondering if i will run into any fitment issues. @jonathane say's they w...
by Bigwilly
March 24th, 2016
Forum: Performance
Topic: CAI (Cold Air Intake) & SRI (Short Ram Intake) Compilation
Replies: 11
Views: 35209

Re: CAI (Cold Air Intake) & SRI (Short Ram Intake) Compilation

nice write up Big LrG! ill put in my 2 cents. You aren't going to see a huge increase in power from an intake, in my case the Takeda SRI, but I do love the sound it produces! It was the first 'performance' mod i did to my car and when it was the only thing installed it was hard to keep off the throt...
by Bigwilly
March 24th, 2016
Forum: Build Threads
Topic: COUPE: Bigwilly's Build Thread
Replies: 14
Views: 35154

Re: COUPE: Bigwilly's Build Thread

Car looks awesome! I was debating on how the dual tip exhaust would look but I think I might have to do it now. Also love the enkeis. I'm kinda tired of the massive lips trend. thanks man, and I'm always a big advocate for the ATLP quad exhaust. not only does it look good it sounds even better. and...
by Bigwilly
February 1st, 2016
Forum: Wanted
Topic: WANTED: TL 3.7 intake mani and throttle body
Replies: 3
Views: 13382

WANTED: TL 3.7 intake mani and throttle body

hey guys I'm looking to buy the TL SH-AWD 3.7L intake manifold and throttle body. doesn't necessarily have to be the matching TL throttle body but definitely one from a 3.7L (i.e.. ZDX, MDX, TL, etc.). normally id like to buy new but the crappy Canadian dollar is making car parts that much more expe...
by Bigwilly
February 1st, 2016
Forum: Build Threads
Topic: COUPE: Bigwilly's Build Thread
Replies: 14
Views: 35154

Re: COUPE: Bigwilly's Build Thread

i realized i hadn't updated this in quite some time so i thought id put up some more recent pics went and got me some new shoes, Enkei GTC01 IMG_3003.jpg went and got the sti lip IMG_3123.JPG dirty roller caught by my boy Dre IMG_3190.JPG a little after hours fun with my buddy dave IMG_3923.jpg
by Bigwilly
February 1st, 2016
Forum: Performance
Topic: Finally got my 3.7L IM done
Replies: 39
Views: 71452

Re: Finally got my 3.7L IM done

indodarknight wrote:I'm curious, what causes the 6-6 to not be able to fit the mdx riser? that you'll have to mill it? is the j35z3 and z2 that much different?

i believe the motor mounts are different causing the Z3 to sit higher, causing interference with the hood if using the full sized MDX riser
It is currently March 28th, 2024